Yellow Magic ceramic caps, quick question

Technology Synth-DIY
#1

Okay. So because these were obsolete: http://www.mouser.com/ProductDetail/TDK/FK18Y5V1H224Z/?qs=kMGq28SsF%2bk44NMhrc0K%2bQ==

I ordered these thinking they were the same or at least similar: http://www.mouser.com/ProductDetail/TDK/FK22C0G1H224J/?qs=sGAEpiMZZMuAYrNc52CMZHuK70fEfNzsjXtuKyiiPUs%3D

Turns out they are physically larger than the obsolete ones. They will fit on the PCB with a bit of work, but I don’t want to ruin anything or blow anything up.

Will these new ones work or should I go back and order something with a smaller lead spacing? Are they similar enough in spec that it won’t matter? Thanks in advance guys.

#2

All the specs look the same except the lead spacing. Should be fine if you can make them fit…as long as they don’t interfere with neighboring parts.
I had so many of these kind of issues over the last week building my yellow magic. My ability to follow directions exceeds my ability to figure things out myself sometimes and I ordered wrong parts or not enough parts.