Shruthi XT troubleshooting scrambled parameter values (SOLVED)

Hi there,

I’ve recently put together a Shruthi XT with a 4pm filter board, but is exhibiting strange behaviour. Specifically the unit boots up but the parameter value along the bottom of the screen constantly changes rapidly. The push buttons do toggle through different screens. If anyone has any ideas of what would be a good place to start troubleshooting I’d appreciate it.


You need to boot with the encoder pressed to select which version of the hardware the processor should drive (normal or XT).

Initially when I tried that it didn’t work, so I checked the encoder and found a bad solder joint. After i cleaned that up I rebooted with the encoder pressed and selected the xt version. Everything appears good now. Thanks for the help.