Shruthi xt is not working properly

I built my Shruthi xt.

    1. Welding components on PCB
    1. Use AVrSMK2, and then make bake_all
      information
      vagrant@ubuntu-xenial:/vagrant/eurorack-modules/shxt/shruthi-1$ make bake_all
      make -f bootloader/makefile fuses
      make[1]: Entering directory ‘/vagrant/eurorack-modules/shxt/shruthi-1’
      /usr/local/CrossPack-AVR/bin/avrdude -V -p m644p -c avrispmkII -P usb -B 10 -e -u
      -U efuse:w:0xfd:m
      -U hfuse:w:0xd6:m
      -U lfuse:w:0xff:m
      -U lock:w:0x2f:m

    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.04s

    avrdude: Device signature = 0x1e960a (probably m644p)
    avrdude: erasing chip
    avrdude: reading input file “0xfd”
    avrdude: writing efuse (1 bytes):

    Writing | ################################################## | 100% 0.02s

    avrdude: 1 bytes of efuse written
    avrdude: reading input file “0xd6”
    avrdude: writing hfuse (1 bytes):

    Writing | ################################################## | 100% 0.02s

    avrdude: 1 bytes of hfuse written
    avrdude: reading input file “0xff”
    avrdude: writing lfuse (1 bytes):

    Writing | ################################################## | 100% 0.02s

    avrdude: 1 bytes of lfuse written
    avrdude: reading input file “0x2f”
    avrdude: writing lock (1 bytes):

    Writing | ################################################## | 100% 0.02s

    avrdude: 1 bytes of lock written

    avrdude done. Thank you.

    make[1]: Leaving directory ‘/vagrant/eurorack-modules/shxt/shruthi-1’
    /usr/local/CrossPack-AVR/bin/avrdude -B 1 -V -p m644p -c avrispmkII -P usb
    -U eeprom:w:shruthi/data/factory_data/internal_eeprom.hex:i
    -U flash:w:build/shruthi1/shruthi1.hex:i -U flash:w:build/muboot/muboot.hex:i
    -U lock:w:0x2f:m

    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.04s

    avrdude: Device signature = 0x1e960a (probably m644p)
    avrdude: NOTE: “flash” memory has been specified, an erase cycle will be performed
    To disable this feature, specify the -D option.
    avrdude: erasing chip
    avrdude: reading input file “shruthi/data/factory_data/internal_eeprom.hex”
    avrdude: writing eeprom (2048 bytes):

    Writing | ################################################## | 100% 6.02s

    avrdude: 2048 bytes of eeprom written
    avrdude: reading input file “build/shruthi1/shruthi1.hex”
    avrdude: writing flash (62464 bytes):

    Writing | ################################################## | 100% 14.10s

    avrdude: 62464 bytes of flash written
    avrdude: reading input file “build/muboot/muboot.hex”
    avrdude: writing flash (65468 bytes):

    Writing | ################################################## | 100% 0.00s

    avrdude: 65468 bytes of flash written
    avrdude: reading input file “0x2f”
    avrdude: writing lock (1 bytes):

    Writing | ################################################## | 100% 0.02s

    avrdude: 1 bytes of lock written

    avrdude: safemode: Fuses OK (E:FD, H:D6, L:FF)

    avrdude done. Thank you.

Anyone have this problem?) :

thank you guys