Parts dimensions / datasheet porn

PCBs

PCBs as DXF files

Everything that’ll pop out of the enclosure

Audio connectors
Power jack
Midi connectors
Switch caps
Switches
Pots (Alps) (Those were used in the first runs)
Pots (Panasonic) (EVUF2L)
Knobs
Rocker
Volume and input gain pots

LCD module

105x36mm board, the module itself being a 70x26 rectangle aligned on the right with a 5mm margin. Holes seem to be a tad smaller than 3mm.

Put in a different way: This with a 25x36mm rectangle of extra board space on the left.

Shruti-1 Logos

http://mutable-instruments.net/static/downloads/vector-logo.pdf
http://mutable-instruments.net/static/downloads/vector-logo.ai

Oops. I get a “page not found” error when clicking on the first link.

Fixed!

Anything special about the LEDs? Just standard 3 mm ones?

Yes, standard 3mm stuff

So, help me out here, these are about 20 or 30 mcd? I’m looking for replacements in blue, but am having trouble finding low-intensity LEDs.

glitched: get the lowest ones you can find. I get mine here SmashTV

*edit

Missed the blue part. My advice: dont do blue. Sounds like a good idea, but they are hard as hell on the eyes. Every project I did blue on I ended up changing. I have never seen a diffused blue, just those clear spotlights.

It’s a bit of a lottery… I’ve bought different kind of LEDs over time and I am not sure what you end up receiving :slight_smile: In a similar way, I don’t think two kits are alike, because I have restocked parts from different suppliers… The only thing about LED is that I obviously make sure that they match. Some of them might be 30mcd (there were some very nice ones - I’m trying to locate the digikey reference id), some of them 20mcd… Even if you could trace it back to the datasheet, I wouldn’t be sure about it, though… The most common one you’ll find in the kit is this one:

Listed as 20mcd in the datasheet, but 30mcd on Farnell’s parametric search…

Oh, ok, thanks for the info. I was just looking for something that’ll match my case and the LCD a little better. Since the LCD has a blueish tone, and my case is white, I wanted to stick to that theme. However, at this point, I just can’t wait to get my case and stick the Shruti in there!