Mounting Ambika MB in White Metal Case

Discontinued products Ambika
#1

I am almost ready to mount the finished Ambika in the White Metal Case.

With the case as opposed to the Plexiglass Enclosure , is it only necessary to use the 40mm standoffs attached from the MB to the bottom of the case and no 10mm standoffs on the top of the MB ?

#2

no need for the top standoffs.
Instructions here

#3

Thanks Adrian

#4

Hello Adrian, what spacers are required for the LEDs, from the picture in your guide they look as though they are mounted 1mm from the board.

#5

Hi, no need for a spacer for LED.
Light pipe will work no matter how far the LED is.

#6

Thank you Adrian

#7

Hi, is the metal enclosure/case available for sale by itself? Thanks in advance!