Edges Calibration

Ok so I’m having lots of issues calibrating my Edges. It seems the pitch is beyond high on Oscillator one and I cannot get it to get back down into a usable range. I have a beatstep and an AKAI max and both yield the same results. I have the freq set to center and I know that my cv sources are sending voltages close to 1 and 3 volts respectively.

The XMOD is set to the down position as well so unless their is a connection issue with the jack inputs I really don’t know what else could be going on. Thanks in advance,
Robby

Send it back, I’ll have a look.