Census of successfully assembled kits

Post here to brag about your successful build. Photos are welcome!

@tanaisfox, that’s batch -1 or -2 :slight_smile:

Starting here myself :slight_smile:

batch 0: 7 units
batch 1: 4 units
batch 2: 6 units
batch 2.5: 1 unit

Batch 2: 1 unit
(All working 100%)

Batch 2: 1 unit

Batch 2: 1 unit
100% working first Time

batch 1: 1 unit

Batch 1: 1 unit

Batch 1 : one unit which is working great :slight_smile:

Batch 1: 1 unit

Batch 2: 1 unit working

batch 2 - 1 unit

Batch 1: 1 unit (with SMR-4 board) working perfectly.

Also, one CEM3379 filter board which works fine except for the audio in. I broke the audio in by putting the bridge in the wrong place, and ruined the pad when I tried to desolder and move it. Nobody replied to my questions about ways to fix it, so I presume it’s not fixable. I understand the lack of instructions for the more “specialist” boards, and the BOM is enough to build the board, but I think perhaps there should be a brief mention of some of the “gotchas” and things to watch out for could be added to those pages.

batch 2 : 1 unit.

Took about 4-5 hours to build… no major issue.

Lcd did not work at first… ended up being s cold solder joint on the lcd trimmer ground… now everything works.

Batch 2: 1 unit
Spent about 5h(!) on each board but they worked immeadiately

batch 2: 1 unit, (1189)

no problems, great stuff!

batch 1: 1 unit, working great!

batch 1 : 1 unit, working fine.

Batch 2: 1unit, It sounds great!

Batch 1: 2 units CEM3379 and SMR4. They work well. I messed up a digital control board and had to get another. Desoldering is really tricky for the Audio and MIDI Jacks. FYI

Just ordered a ssm2044.