Can't calibrate Anushri properly

No matter what i do, octaves remain too large.
i’ve got the pitch offset (pot 2) to the minimum, i’ve disabled the pitch correction (hold+rec).
I’m using Yarns to generate CV. My microbrute as well. Both are well calibrated.

Replace R75 by a 20k trimmer.

I’ll do that. Linear or log doesn’t matter, does it ?

Linear will make tuning easier.


So…i did replace the trimmer. Nothing changed. The smallest octave i can get sounds like it’s 13 semi tones.

Then you’ll have to try replacing R61 by a 91k resistor.

Ok ! Hope it will work !

Thanks for the help.