Anushri VCO CV issue

It was working last night and controlling gate / pitch on my euro modular, but no longer today… Only thing i did was to try and fine tune the oscillators, since then my pitch CV is dead :frowning:

I’ll get the scope / meter out tomorrow, but was wondering if any of the key combos (pressed to turn the tuning process on / off) could have somehow disabled the pitch CV? The weird thing is gate still works fine.

> if any of the key combos (pressed to turn the tuning process on / off) could have somehow disabled the pitch CV?

No - the CV input is wired straight to the VCO input - pure analog path, no digital circuitry that could bypass it.

It turned out that it was shorting inside the connector, one of the pins was touching the tip. After careful consideration, it was fixed by judicious use of screwdriver modulation :stuck_out_tongue: